The Wildcard TDM400P is a half-length PCI 2.2 compliant card that supports from one to four telephone interfaces for connecting analog telephones or analog lines to a PC. Using Digium's Asterisk™ PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system.

The TDM400P takes the place of an expensive channel bank and brings the system price point to a low level. By using FXO and FXS modules with the TDM400P, one can create a solution with support for a range of telephones. To scale this solution, simply add additional TDM400P cards populated with modules.

The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines.

The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the TDM800P reduces part complexity, cable clutter, and points of failure.

The TDM800P contains two module banks. Each bank supports up to four analog interfaces. The module banks may be filled either with one standard Digium® quad analog module (FXS - S400M, FXO - X400M), or up to two standard Digium® single analog modules (FXS- S110M, FXO - X100M) enabling the creation of any combination of ports.

The Wildcard TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines.

Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system.

Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The quad-FXO and quad-FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 256 taps of echo cancellation for superior echo cancellation on both FXO and FXS interfaces. Scaling of this solution is accomplished by adding additional TDM2400P cards.

Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

The TE210P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE210P supports a 3.3v PCI slot only - typically available on newer server motherboards and in 64-bit PCI bus architectures.

he TE410P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE410P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE410P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

Digium cards are smarter! Second-generation firmware for Digium multispan TE-series hardware PCI cards, provides several new features. These features allow Digium cards to do more work in hardware and leaving the server's CPU open to do other tasks, all of which contribute to less CPU overhead, and therefore improved performance, and more channels running through a single PC or server.

The TE410P supports a 3.3v PCI slot only - typically available on newer server motherboards and in 64-bit PCI bus architectures. The TE405P is for use only with a 5.0 volt PCI slot.

Sangoma AFT Hardware together with Wanpipe Drivers: TDM API Interface Layer is designed to support FreeSwitch Open PBX Architecture.

Both Sangoma hardware and software are heavily optimized to drive FreeSwitch Open Source PBX efficiently and reliably.

Features:

• High Availability TDM API Driver.
• Single TDM interrupt for all T1/E1 ports
• Onboard Hardware Echo Cancellation
• 1024 taps/128ms per channel.
• Hardware HDLC on d-channels.
• Hardware TDM Events: DTMF, RBS.

Vyatta has changed the networking world by developing the first commercially supported, open-source router, firewall, VPN solution to provide an alternative to over-priced, inflexible products from proprietary vendors. Vyatta delivers the features, performance, and reliability of an enterprise-class secure router with the added benefits of flexible deployment options--x86 hardware, blade servers, virtualization-- freedom to integrate applications, and the economic advantages of commodity hardware and components.

Introduce new levels of economics, choice, and control into your network:

Economics: Save 50% or more over proprietary products! Leverage industry standard x86 servers and off-the-shelf components.

Choice: Simplify network deployment by running Vyatta on: Vyatta appliances, x86 hardware, server blades, or common virtualization platforms.

Control: Source code availability and community influence allow for faster feature integration and the freedom to build your own custom solutions.

Vyatta delivers complete, ready-to-deploy, open-source networking solutions [software and appliances] that make it possible for anyone to own an enterprise-class router/firewall/VPN for a fraction of the cost of traditional closed-source, proprietary products. Vyatta solutions offer:

Better value: With Vyatta, you can save 50% or more over proprietary router and firewall products.

Better performance: Vyatta has proven in independent tests that standard x86 hardware can outperform proprietary hardware.

Better scalability: Adding interfaces, memory or functions to your system? Leverage the x86 hardware ecosystem and the Debian application universe to expand your system for less.

Better flexibility: Vyatta's software-base and open architecture allows you to deploy network infrastructure functions as applications in virtualized environments.