IP PBX Systems
Asterisk PBX
IP Phones
Call Center
|
|
Unlocking the power of Asterisk, Digium's line of PCI hardware is designed specificially with Asterisk in mind, and has been proven and tested in a wide range of installations worldwide.
Digium's digital interface cards share innovative design and small form factors, making them ideal for high density solutions.
Combined with Asterisk, Digium's analog interface cards provide connection to traditional telephony lines and stations.
|
 |
The Wildcard TDM400P is a half-length PCI 2.2 compliant card that supports from one to four telephone interfaces for connecting analog telephones or analog lines to a PC. Using Digium's Asterisk™ PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system.
The TDM400P takes the place of an expensive channel bank and brings the system price point to a low level. By using FXO and FXS modules with the TDM400P, one can create a solution with support for a range of telephones. To scale this solution, simply add additional TDM400P cards populated with modules.
|
 |
The Wildcard TDM800P is a half-length PCI 2.2-compliant, 8 port card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines.
The TDM800P provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single PCI bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the TDM800P reduces part complexity, cable clutter, and points of failure.
The TDM800P contains two module banks. Each bank supports up to four analog interfaces. The module banks may be filled either with one standard Digium® quad analog module (FXS - S400M, FXO - X400M), or up to two standard Digium® single analog modules (FXS- S110M, FXO - X100M) enabling the creation of any combination of ports.
|
 |
The Wildcard TDM2400P is a full-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports a combination of up to 6 FXS and/or FXO modules for a total of 24 lines.
Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a telephony environment that includes all the sophisticated features of a high-end business telephone system.
Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The quad-FXO and quad-FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 256 taps of echo cancellation for superior echo cancellation on both FXO and FXS interfaces. Scaling of this solution is accomplished by adding additional TDM2400P cards.
Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.
|
 |
|
The Wildcard TE120P is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.
Used in conjunction with Asterisk®, the TE120P can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.
The Wildcard TE120P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus™ technology. VoiceBus technology allows the TE120P to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts.
The TE120P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The TE120P works in both 3V and 5V slots by auto detecting the slot's voltage
By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the TE120P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE120Ps to each individual PC. Add additional cards as you need them for your expanding applications.
The TE120P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.
Using this card in concert with Digium's Asterisk® software, standard PC hardware, and the Linux® OS, you can upgrade your PBX to a sophisticated telephony environment capable of supporting both voice and data channels. |
|
 |
The TE210P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.
The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.
Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.
The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.
The TE210P supports a 3.3v PCI slot only - typically available on newer server motherboards and in 64-bit PCI bus architectures.
|
 |
he TE410P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.
The TE410P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.
Digium has designed the TE410P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.
The TE410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.
Digium cards are smarter! Second-generation firmware for Digium multispan TE-series hardware PCI cards, provides several new features. These features allow Digium cards to do more work in hardware and leaving the server's CPU open to do other tasks, all of which contribute to less CPU overhead, and therefore improved performance, and more channels running through a single PC or server.
The TE410P supports a 3.3v PCI slot only - typically available on newer server motherboards and in 64-bit PCI bus architectures. The TE405P is for use only with a 5.0 volt PCI slot.
|
 |
|
|
